TM 9-2320-365-20-3
11-6. REAR SPRING BRAKE CAGING
This task covers:
a. Caging
b. Uncaging
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Socket, Socket Wrench (Item 38, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to
personnel.
a. Caging.
NOTE
To cage brakes, apply caging procedure
to both top and bottom spring brake
chambers.
(1) Remove nut (1) and washer (2) from caging bolt (3).
(2) Remove caging bolt (3) from caging bolt holder (4).
11-30
