TM 9-2320-365-20-3
b. Installation.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash immediately
with soap and water. Failure to comply
may result in injury to personnel.
NOTE
Left and right front brake air chambers are
installed the same way. Left side shown.
(1) Apply antiseize compound to threads of two fittings (1).
(2) Install two fittings (1) in air chamber (2).
(3) Position collet nut (3) on air chamber (2).
(4) Apply antiseize compound to threads of air chamber
(2).
CAUTION
Ensure air chamber is installed with fittings
positioned up. Failure to comply may result in
damage to equipment.
(5)
Install air chamber (2) in plunger housing (4) until it
bottoms.
CAUTION
Air chamber must not be loosened no more
than one full turn.
Failure to comply may
result in damage to equipment.
(6)
Loosen air chamber (2) until fittings (1) are up.
Change 1
11-35
