TM 9-2320-365-20-3
11-7. FRONT BRAKE AIR CHAMBER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Pipe (Item 55, Appendix C)
Trestle, Motor Vehicle Maintenance (Item 45, Appendix
C)
Goggles, Industrial (Item 15, Appendix C)
Respirator, Air Filter (Item 29, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Antiseize Compound (Item 63, Appendix D)
Ties, Cable, Plastic (Item 76, Appendix D)
Nut, Plain, Round (Item 115.1, Appendix G)
Personnel Required
(2)
a. Removal.
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to
personnel.
CAUTION
Use caution not to pinch left side air
hoses when positioning trestles. Failure
to comply may result in damage to
equipment.
NOTE
Left and right front brake air chambers
are removed the same way. Left side
shown.
(1) Position front of vehicle on trestle so wheel is off
ground.
(2) Remove left front wheel from vehicle (TM 9-2320-365-
10).
Change 1
11-33
