TM 9-2320-365-20-3
11-12. INVERSION VALVE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Antiseize Compound (Item 63, Appendix D)
Nut, Self-Locking (2) (Item 148, Appendix G)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to
personnel.
a. Removal.
NOTE
Tag air hoses and connection points prior to
disconnecting.
(1) Disconnect two air hoses (1) from branch tee fitting (2).
(2) Disconnect two air hoses (3) from 90-degree fittings (4).
(3) Disconnect two air hoses (5) from run tee fitting (6).
11-66
Change 1
