TM 9-2320-365-20-3
b. Air Brake Protecting Valve Installation.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury to personnel.
(1) Apply antiseize compound to threads of plug (1),
bushing (1.1), relief valve (2), run tee fitting (3), two 45-
degree fittings (4), 90-degree fitting (5) and fitting (6).
(2) Install plug (1) in air brake protecting valve (7).
(2.1) Install bushing (1.1) in air brake protecting valve (7).
(3) Install relief valve (2) in air brake protecting valve (7).
(4) Install run tee fitting (3) in air brake protecting valve (7).
(5) Install two 45-degree fittings (4) in air brake protect-ing
valve (7).
(6) Install 90-degree fitting (5) in air brake protecting valve
(7).
(7) Install fitting (6) in air brake protecting valve (7).
(8) Position air brake protecting valve (7) on panel (8) with
two washers (9), screws (10) and self-locking nuts (11).
(9) Tighten two self-locking nuts (11) to 14-18 lb-ft (20-24
N·m).
Change 1
11-83
