TM 9-2320-365-20-3
(9) Remove two air pressure transmitters (29) from tee
fittings (30).
NOTE
Note orientation of fittings prior to
removal.
(10) Remove two 90-degree fittings (21) from tee fittings
(30).
(11) Remove two tee fittings (30) from park control two-way
check valve (27).
(12) Remove 90-degree fitting (23) from park control two-
way check valve (27).
b. Installation.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to
skin and clothing. Keep away from
open fire and use in a well-ventilated
area. If adhesive, solvent, or sealing
compound gets on skin or clothing,
wash immediately with soap and water.
Failure to comply may result in injury
to personnel.
(1) Apply antiseize compound to threads of 90-degree
fitting (1), two tee fittings (2), and 90-degree fittings (3).
(2) Install 90-degree fitting (1) in park control two-way
check valve (4).
(3) Install two tee fittings (2) in park control two-way check
valve (4).
(4) Install two 90-degree fittings (3) in tee fittings (2).
11-87
