TM 9-2320-365-20-5
NOTE
Install plastic cable ties as required.
(3) Position terminal lug TL169 (6) on reverse polarity relay
24V LOAD terminal (7) with lockwasher (8) and nut (9).
(4) Position terminal lug TL168 (10) on reverse polarity relay
24V BAT terminal (11) with lockwasher (12) and nut (13).
(5) Tighten nuts (9 and 13) to 27-33 lb-ft (37-45 N·m).
(6) Position dust boots (14 and 15) on terminal lugs TL169
(6) and TL168 (10).
(7) Position terminal lug TL174 (16) on reverse polarity relay
12V LOAD terminal (17) with lockwasher (18) and nut
(19).
(8) Position terminal lug TL173 (20) on reverse polarity relay
12V BAT terminal (21) with lockwasher (22) and nut (23).
(9) Tighten nuts (19 and 23) to 108-132 lb-in. (12-15 N·m).
(10) Position dust boots (24 and 25) on terminal lugs TL174
(16) and TL173 (20).
(11) Position intake air cleaner boot (26) on intake air cleaner
housing (27) with clamp (28).
(12) Position air compressor intake hose (29) on intake air
cleaner boot (26) with clamp (30).
(13) Tighten clamps (28 and 30) to 36-48 lb-in. (4-5 N·m).
20-363
