TM 9-2320-365-20-5
20-59. 200 AMP ALTERNATOR TO TERMINAL BLOCK 12 VDC CABLE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Spare tire lowered (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Batteries disconnected (para 7-48).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Ties, Cable, Plastic (Item 76, Appendix D)
Lockwasher (Item 96, Appendix G)
Lockwasher (Item 89, Appendix G)
a. Removal.
NOTE
Remove plastic cable ties as required.
(1) Lift dust boot (1) on terminal lug TL60 (2).
(2) Remove nut (3), lockwasher (4), washer (5), and terminal
lug TL60 (2) from alternator terminal (6).
Discard
lockwasher.
(3) Remove dust boot (1) from terminal lug TL60 (2).
(4) Loosen clamp (7) on turbocharger intake hose (8).
(5) Remove turbocharger intake hose (8) from intake air
cleaner boot (9).
20-365
