TM 9-2320-365-20-5
20-59. 200 AMP ALTERNATOR TO TERMINAL BLOCK 12 VDC CABLE REPLACEMENT
(CONT)
(6) Remove nut (10), lockwasher (11), washer (12), and
terminal lugs TL61 (13) and TL171 (14) from terminal
block terminal (15). Discard lockwasher.
(7) Remove three screws (16), washers (17), clamps (18),
and 200 amp alternator to terminal block 12 vdc cable
(19) from engine (20).
(8) Remove convoluted tubing (21) from 200 amp alternator
to terminal block 12 vdc cable (19).
b. Installation.
NOTE
Install plastic cable ties as required.
(1) Install convoluted tubing (1) on 200 amp alternator to
terminal block 12 vdc cable (2).
(2) Position 200 amp alternator to terminal block 12 vdc
cable (2) on engine (3) with three clamps (4), washers
(5), and screws (6).
(3) Tighten three screws (6) to 22-27 lb-ft (31-37 N·m).
20-366
