KNOWN INFO
7.
TEST OPTIONS
REASON FOR QUESTION
CAUTION
Read CAUTION
on following page.
Continuity Test or
STE/ICE-R Test #91
Repair wire 54 from connector P31
socket 14 to terminal lug TL28 (para 2-40)
or replace engine control cable assembly
(para 7-72).
Is continuity present from
relay K19 socket 87A to
connector J31 pin 14?
Fuel quantity OK.
Fuel/water separator primed.
Air cleaner hose or tube OK.
Start inhibit pushbutton switch
OK.
Relay K19 OK.
POSSIBLE PROBLEMS
Faulty dashboard cable
assembly.
Faulty engine control cable
assembly.
If continuity is not present,
wire 54 from relay K19 socket
87A on PDP to connector J31
pin 14 is faulty. If continuity
is present, wire 54 from
connector P31 socket 14 to
terminal lug TL28 is faulty.
YES
NO
Repair wire 54 from relay K19 socket
87A on PDP to connector J31 pin 14
(para 2-40) or replace WTEC II dashboard
cable assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
TM 9-2320-365-20-1
2-306.2 Change 1
e6. ENGINE CRANKS BUT DOES NOT START (CONT)
