KNOWN INFO
Continuity Test or
STE/ICE-R Test #91
REASON FOR QUESTION
TEST OPTIONS
POSSIBLE PROBLEMS
Faulty dashboard cable
assembly.
Faulty engine control cable
assembly.
If continuity is not present,
wire 3015 from connector J31
pin 5 to terminal board TB2
position 18 on power
distribution panel (PDP) is
faulty. If continuity is present,
wire 3015 from connector P31
socket 5 to terminal lug TL29
is faulty.
e6. ENGINE CRANKS BUT DOES NOT START (CONT)
Is continuity present from
connector J31pin 5 to
ground?
4.
CAUTION
Read CAUTION
on following page.
Repair wire 3015 from connector P31
socket 5 to terminal lug TL29 (para 2-40)
or replace engine control cable
assembly (para 7-72).
NO
YES
Repair wire 3015 from connector J31 pin 5
to terminal board TB2 position 18 on power
distribution panel (PDP) (para 2-40) or replace
WTEC II dashboard cable assembly (para 7-10)
or WTEC III dashboard cable assembly (para 7-11).
TM 9-2320-365-20-1
2-304 Change 1
Fuel quantity OK.
Fuel/water separator primed.
Air cleaner hose or tube OK.
Start inhibit pushbutton switch
OK.
Relay K19 OK.
