TM 9-2320-365-20-4
NOTE
Perform step (2) on van bodies serial number
191 and higher.
(2) Remove four screws (1), lockwashers (2), washers (3),
and cover (4) from 12/24 vdc power entry panel (5).
Discard lockwashers.
(3) Remove dust cap (6) from 12/24 vdc power entry
connector J173 (7).
(4) Remove sealing compound from edges of 12/24 vdc
power entry connector J173 (7).
NOTE
Steps (5) and (6) require the aid of an
assistant.
(5) Remove nut (8), lockwasher (9), dust cap (6), and screw
(10) from 12/24 vdc power entry connector J173 (7).
Discard lockwasher.
(6) Remove three nuts (11), lockwashers (12), screws (13),
12/24 vdc power entry connector J173 (7), and gasket
(14) from 12/24 vdc power entry panel (5). Discard
lockwashers.
16-475
