TM 9-2320-365-20-4
(6) Perform steps (2) through (5) on remaining wires.
NOTE
Steps (7) and (8) require the aid of an
assistant.
(7) Install gasket (1) and 12/24 vdc power entry connector
J173 (2) in 12/24 vdc power entry panel (6) with three
screws (7), lockwashers (8), and nuts (9).
(8) Install dust cap (10) on 12/24 vdc power entry connector
J173 (2) with screw (11), lockwasher (12), and nut (13).
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(9) Apply sealing compound on edges of 12/24 vdc power
entry connector J173 (2).
(10) Install dust cap (10) on 12/24 vdc power entry connector
J173 (2).
NOTE
Perform step (11) on van bodies serial
number 191 and higher.
(11) Install cover (14) on 12/24 vdc power entry panel (6) with
four washers (15), lockwashers (16), and screws (17).
16-477
