TM 9-2320-365-20-4
16-72. M1079 12/24 VDC POWER ENTRY PANEL AND CONDUIT REPLACEMENT
(CONT)
(5) Remove sealing compound from edges of 12/24 vdc
power entry panel (8).
WARNING
Wear appropriate eye protection when
removing rivets. Failure to comply may
result in injury to personnel.
NOTE
Perform step (6) on van body serial numbers
001 through 190.
(6) Remove 22 rivets (9) and 12/24 vdc power entry panel
(8) from van body wall (10).
NOTE
Perform step (7) on van bodies serial number
191 and higher.
(7) Remove 14 rivets (9) and 12/24 vdc power entry panel
(8) from van body wall (10).
(8) Remove sealing compound from van body wall (10).
(9) Remove 16 screws (11), lockwashers (12), washers (13),
and raceway cover (14) from raceway (15). Discard
lockwashers.
(10) Disconnect emergency light connector J166 (16) from
connector P166 (17).
16-480
