TM 9-2320-365-20-4
16-72. M1079 12/24 VDC POWER ENTRY PANEL AND CONDUIT REPLACEMENT
(CONT)
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
CAUTION
Coat all rivets with sealing compound prior to
installation. Failure to comply may result in
damage to equipment.
(7) Apply sealing compound on van body wall (15) and
rivets (16).
NOTE
Perform step (8) on van bodies serial number
191 and higher.
(8) Install 12/24 vdc power entry panel (17) on van body
wall (15) with 14 rivets (16).
NOTE
Perform step (9) on van body serial numbers
001 through 190.
(9) Install 12/24 vdc power entry panel (17) on van body
wall (15) with 22 rivets (16).
(10) Apply sealing compound on edges of 12/24 vdc power
entry panel (17).
16-482
