TM 9-2320-365-20-5
20-55. 200 AMP ALTERNATOR KIT REMOVAL (CONT)
(108) Remove two screws (165),lockwashers (166), and belt
adjusting arm (167) from alternator bracket (159).
Discard lockwasher.
(109) Position belt adjusting arm (168) on alternator bracket
(159) with two lockwashers (166) and screws (165).
(110) Tighten two screws (165) to 25-32 lb-ft (35-43 N·m).
b. Follow-On Maintenance.
(1) Install 100 amp reverse polarity relay (para 7-27).
(2) Install 100 amp alternator (para 7-2).
(3) Raise spare tire (TM 9-2320-365-10).
(4) Lower cab (TM 9-2320-365-10).
(5) Connect batteries (para 7-48).
(6) Start engine (TM 9-2320-365-10).
(7) Check alternator operation (TM 9-2320-365-10).
(8) Shut down engine (TM 9-2320-365-10).
End of Task.
20-348
Change 1
