TM 9-2320-365-20-5
(10) Remove self-locking nut (14) and washer (15) from
voltage regulator terminal (16).
(11) Position terminal lug TL110 (17) on voltage regulator
terminal (16) with washer (15) and self-locking nut (14).
(12) Tighten self-locking nut (14) to 24 lb-in. (3 N·m).
(13) Position dust boot (18) on terminal lug TL110 (17).
(14) Remove self-locking nut (19) and washer (20) from
voltage regulator terminal (21).
(15) Position terminal lug TL35 (22) on voltage regulator
terminal (21) with washer (20) and self-locking nut (19).
(16) Tighten self-locking nut (19) to 24 lb-in. (3 N·m).
(17) Position dust boot (23) on terminal lug TL35 (22).
(18) Remove screw (24), lockwasher (25), and washer (26)
from alternator (3).
(19) Position ground strap (27), washer (26), and terminal lug
TL5 (28) on alternator (3) with washer (26), lockwasher
(25), and screw (24).
(20) Tighten screw (24) to 60-84 lb-in. (7-9 N·m).
Change 1
20-353
