TM 9-2320-365-20-3
11-3. REAR BRAKE SHOES REPLACEMENT/ADJUSTMENT (CONT)
CAUTION
Wheel drum clearance must be checked
along centerline of brake shoe at scallop.
Failure to comply may result in damage to
equipment.
All adjustments on any wheel should be within
six clicks of one another. Record the number
of clicks as adjusting screw is loosened. If
not, repeat procedure or examine for damage.
Failure to comply may result in damage to
equipment.
(17) Back-off adjusting screw (8) to obtain 0.020-0.040 in.
(0.5 mm) clearance between brake shoe and wheel
drum.
(18) Remove screw (6), lockwasher (7), and brake adjusting
tool support from spider (4).
(19) Install lockwasher (7) and screw (6) in spider (4).
e. Follow-On Maintenance.
(1) Install wheel and tire (TM 9-2320-365-10).
(2) Start engine (TM 9-2320-365-10).
(3) Road test truck and check for proper brake operation.
(4) Shut down engine (TM 9-2320-365-10).
End of Task.
11-16
Change 1